some housekeeping

.gitignore

@@ -9,3 +9,4 @@ compile_commands.json
 include/
 !scripts/include/
 *.o
+test

CMakeLists.txt

@@ -1,6 +1,13 @@
 cmake_minimum_required(VERSION 3.13)
 
-option(BUILD_FOR_PICO "Build for Raspberry Pi Pico" ON)
+set(BUILD_PLATFORM "Linux" CACHE STRING "Target platform: Pico or Linux")
+set_property(CACHE BUILD_PLATFORM PROPERTY STRINGS Pico Linux)
+
+if(NOT EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/cmake/platform_${BUILD_PLATFORM}_pre.cmake")
+    message(FATAL_ERROR "Unknown BUILD_PLATFORM '${BUILD_PLATFORM}' (no cmake/platform_${BUILD_PLATFORM}_pre.cmake found)")
+endif()
+
+string(TOLOWER ${BUILD_PLATFORM} BUILD_PLATFORM_LOWER)
 
 set(GEOGRAPHICLIB_DIR ${CMAKE_CURRENT_SOURCE_DIR}/geographiclib)
 
@@ -10,55 +17,27 @@ set(BUILD_DOCUMENTATION OFF CACHE BOOL "" FORCE)
 set(BUILD_BOTH_LIBRARIES OFF CACHE BOOL "" FORCE)
 set(PACKAGE_DEBIAN OFF CACHE BOOL "" FORCE)
 
-# Automatically collect core sources and platform-specific HAL files
+# Pre-project platform setup (e.g. Pico's pico_sdk_import.cmake must run
+# before project(), and it must set PROJECT_LANGUAGES).
+include(${CMAKE_CURRENT_SOURCE_DIR}/cmake/platform_${BUILD_PLATFORM}_pre.cmake)
+
+project(p-rad ${PROJECT_LANGUAGES})
+
+set(CMAKE_CXX_STANDARD 23)
+set(CMAKE_CXX_STANDARD_REQUIRED ON)
+
+add_compile_options(-Wall -Wextra -Wpedantic -Wno-write-strings)
+
+# NOTE: don't use add_link_options/add_compile_options here - they apply to
+# every target including pico-sdk's bs2_default, whose binary gets fully
+# garbage-collected. Scope them to the p-rad target instead (see platform files).
+
+# Automatically collect core sources and platform-specific HAL files.
+# HAL files are matched by suffix convention: src/hal/*_<platform>.cpp
 file(GLOB CORE_SOURCES CONFIGURE_DEPENDS "src/core/*.cpp" "src/core/*.c")
-file(GLOB HAL_PICO_SOURCES CONFIGURE_DEPENDS "src/hal/*_pico.cpp")
+file(GLOB HAL_SOURCES CONFIGURE_DEPENDS "src/hal/*_${BUILD_PLATFORM_LOWER}.cpp")
-file(GLOB HAL_LINUX_SOURCES CONFIGURE_DEPENDS "src/hal/*_linux.cpp")
 
-if(BUILD_FOR_PICO)
+add_subdirectory(${GEOGRAPHICLIB_DIR} EXCLUDE_FROM_ALL)
-    set(PICO_BOARD pico_w CACHE STRING "Board type")
-    include(pico_sdk_import.cmake)
-    project(p-rad C CXX ASM)
 
-    set(CMAKE_CXX_STANDARD 23)
+# Post-project platform setup: add_executable, link libraries, platform-specific calls.
-    set(CMAKE_CXX_STANDARD_REQUIRED ON)
+include(${CMAKE_CURRENT_SOURCE_DIR}/cmake/platform_${BUILD_PLATFORM}.cmake)
-
-    pico_sdk_init()
-
-    add_subdirectory(${GEOGRAPHICLIB_DIR} EXCLUDE_FROM_ALL)
-    target_compile_options(GeographicLib INTERFACE -fexceptions -frtti)
-
-    add_executable(p-rad
-        src/main.cpp
-        ${CORE_SOURCES}
-        ${HAL_PICO_SOURCES}
-    )
-
-    target_compile_definitions(p-rad PRIVATE PICO_BUILD)
-    target_include_directories(p-rad PRIVATE src)
-    target_link_libraries(p-rad pico_stdlib pico_cyw43_arch_lwip_threadsafe_background hardware_rtc GeographicLib)
-
-    pico_enable_stdio_usb(p-rad 1)
-    pico_enable_stdio_uart(p-rad 0)
-
-    pico_add_extra_outputs(p-rad)
-else()
-    project(p-rad CXX)
-
-    set(CMAKE_CXX_STANDARD 23)
-    set(CMAKE_CXX_STANDARD_REQUIRED ON)
-
-    add_subdirectory(${GEOGRAPHICLIB_DIR} EXCLUDE_FROM_ALL)
-
-    add_executable(p-rad
-        src/main.cpp
-        ${CORE_SOURCES}
-        ${HAL_LINUX_SOURCES}
-    )
-
-    target_include_directories(p-rad PRIVATE src)
-    find_package(Threads REQUIRED)
-    find_package(SDL3 REQUIRED CONFIG)
-    find_package(CURL REQUIRED)
-    target_link_libraries(p-rad Threads::Threads SDL3::SDL3 CURL::libcurl GeographicLib)
-endif()

Kconfig

@@ -63,11 +63,31 @@ config VECTOR_FOLLOW_TRACK_RATE
 	  This option will turn the vector from line into curve.
 	  This is of course be more computationaly expensive.
 
+config AIRCRAFT_RHOMBUS_RADIUS
+	int "Radius of rhombus or aircraft icon" 
+	range 0 65535
+	default 8
+
 config CHARACTER_SPACING
 	int "Spacing between character in pixels"
-	range 1 255
+	range 0 255
 	default 1
 
+config X_TEXT_OFFSET
+	int "X offset of text from aircraft"
+	range 0 65535
+	default 10
+
+config NO_CALLSIGN_IDENTIFICATION
+	string "Callsign used for aircraft with unknown callsign"
+	default "UNK"
+
+config EXTRA_INFO
+	bool "Enable extra information on top of the screen"
+	default 1
+	help
+	  Show information like number of tracked aircraft on top of the screen
+
 comment "Receiver configuration"
 
 config FALLBACK_LAT
@@ -88,7 +108,7 @@ config METRIC
 	bool "Use metric units"
 	default y
 	help
-	  Show altitudes in meters instead of feet.
+	  Show units in metric instead of aeronautical.
 
 comment "Platform dependent options"
 

Makefile

@@ -12,12 +12,14 @@ all: linux pico
 
 linux: $(AUTOHEADER)
 	mkdir -p build-linux
-	(cd build-linux && cmake .. -DBUILD_FOR_PICO=OFF && make -j$(nproc))
+	(cd build-linux && cmake .. -DBUILD_PLATFORM=Linux && make -j$(nproc))
 
 pico: $(AUTOHEADER)
 	mkdir -p build-pico
-	(cd build-pico && cmake .. -DBUILD_FOR_PICO=ON && make -j$(nproc))
+	(cd build-pico && cmake .. -DBUILD_PLATFORM=Pico && make -j$(nproc))
 
+clean:
+	rm -fr build*
 # ---------------------------------------------------------------------------
 # kconfig targets
 # ---------------------------------------------------------------------------

cmake/platform_Linux.cmake

@@ -0,0 +1,23 @@
+add_executable(p-rad
+    src/main.cpp
+    ${CORE_SOURCES}
+    ${HAL_SOURCES}
+)
+target_compile_options(p-rad PRIVATE -ffunction-sections -fdata-sections)
+target_link_options(p-rad PRIVATE -Wl,--gc-sections)
+if(CMAKE_BUILD_TYPE EQUAL Release)
+add_compile_options(-O3 -s)
+endif()
+
+target_include_directories(p-rad PRIVATE src)
+
+find_package(Threads REQUIRED)
+find_package(SDL3 REQUIRED CONFIG)
+find_package(CURL REQUIRED)
+
+target_link_libraries(p-rad
+    Threads::Threads
+    SDL3::SDL3
+    CURL::libcurl
+    GeographicLib
+)

cmake/platform_Linux_pre.cmake

@@ -0,0 +1 @@
+set(PROJECT_LANGUAGES CXX)

cmake/platform_Pico.cmake

@@ -0,0 +1,31 @@
+pico_sdk_init()
+
+target_compile_options(GeographicLib INTERFACE -fexceptions -frtti)
+
+add_executable(p-rad
+    src/main.cpp
+    ${CORE_SOURCES}
+    ${HAL_SOURCES}
+)
+
+target_compile_options(p-rad PRIVATE -ffunction-sections -fdata-sections)
+target_link_options(p-rad PRIVATE -Wl,--gc-sections)
+
+if(CMAKE_BUILD_TYPE EQUAL Release)
+    add_compile_options(-Os -s)
+endif()
+
+
+target_compile_definitions(p-rad PRIVATE PICO_BUILD)
+target_include_directories(p-rad PRIVATE src)
+target_link_libraries(p-rad
+    pico_stdlib
+    pico_cyw43_arch_lwip_threadsafe_background
+    hardware_rtc
+    GeographicLib
+)
+
+pico_enable_stdio_usb(p-rad 1)
+pico_enable_stdio_uart(p-rad 0)
+
+pico_add_extra_outputs(p-rad)

cmake/platform_Pico_pre.cmake

@@ -0,0 +1,4 @@
+set(PROJECT_LANGUAGES C CXX ASM)
+
+set(PICO_BOARD pico_w CACHE STRING "Board type")
+include(${CMAKE_SOURCE_DIR}/pico_sdk_import.cmake)

src/core/gfx.cpp

@@ -42,7 +42,7 @@ draw::color_t interpolateColor(double value,
   return stops.back().color;
 }
 
-#ifdef CONFIG_METRIC
+
 draw::color_t get_altitude_color(uint32_t value) {
   static constexpr std::array<color_stop, 11> stops = {{
 #ifdef CONFIG_METRIC
@@ -57,8 +57,7 @@ draw::color_t get_altitude_color(uint32_t value) {
       {6000, {40, 175, 215}},
       {9000, {50, 110, 240}},
       {12000, {140, 50, 220}}
-#endif
+#else
-#ifndef CONFIG_METRIC
       {0, {220, 90, 20}},      // Brown/Dark Orange
       {500, {245, 115, 25}},   // Orange
       {1000, {250, 150, 30}},  // Light Orange
@@ -74,7 +73,6 @@ draw::color_t get_altitude_color(uint32_t value) {
   }};
   return interpolateColor(value, stops);
 }
-#endif
 
 enum letter_id {
   LETTER_A,
@@ -159,10 +157,10 @@ void putchar(const char c, uint16_t x, uint16_t y, const draw::color_t color) {
     x = x_orig;
     for (uint8_t j = 0; j < FONT_WIDTH; j++) {
       if (get_Nth_bit_in_grid(_5x7_dotmatrix_charset,
-                              static_cast<typeof(character_bit_offset)>(
+                              static_cast<std::remove_const_t<decltype(character_bit_offset)>>(
                                   character_bit_offset + j),
-                              static_cast<typeof(character_bit_offset)>(i),
+                              static_cast<std::remove_const_t<decltype(character_bit_offset)>>(i),
-                              static_cast<typeof(character_bit_offset)>(
+                              static_cast<std::remove_const_t<decltype(character_bit_offset)>>(
                                   _5X7_DOTMATRIX_CHARSET_WIDTH))) {
         draw::pixel(x, y, color);
       }
@@ -171,7 +169,7 @@ void putchar(const char c, uint16_t x, uint16_t y, const draw::color_t color) {
     y++;
   }
 }
-void puts(const std::string &s, uint16_t x, uint16_t y, draw::color_t color) {
+void puts(const std::string &s, const uint16_t x, const uint16_t y, const draw::color_t color) {
   for (size_t i = 0; i < s.length(); i++) {
     putchar(s[i], x+((FONT_WIDTH+CONFIG_CHARACTER_SPACING)*i), y, color);
   }

src/core/units.hpp

@@ -1,9 +1,22 @@
 #pragma once
+#include "config.hpp"
 template<typename T>
 static inline T feet_to_meters(T ft) {
         return static_cast<T>(ft * 0.3048);
 }
 template<typename T>
-static inline T knot_to_km(T kn) {
+static inline T knot_to_km(T kt) {
-        return static_cast<T>(kn * 0.5399568);
+        return static_cast<T>(kt * 1.852);
 }
+
+#ifdef CONFIG_METRIC
+#define SPEED_UNIT "kmph"
+#else
+#define SPEED_UNIT "knot"
+#endif
+
+#ifdef CONFIG_METRIC
+#define ALTITUDE_UNIT "m"
+#else
+#define ALTITUDE_UNIT "ft"
+#endif

src/hal/draw.hpp

@@ -20,4 +20,5 @@ struct rect_t {
         void circle(const uint16_t x_center, const uint16_t y_center,const uint16_t radius, const color_t color);
         void rhombus(const uint16_t x_center, const uint16_t y_center,const uint16_t radius, const color_t color);
         void line(const uint16_t x1,const uint16_t y1,const uint16_t x2,const uint16_t y2, const color_t color);
+        void arc(uint16_t start_x, uint16_t start_y, float start_angle, float speed /*in pps*/,float angular_speed, uint16_t duration, color_t color);
 }

src/hal/hal_linux.cpp

@@ -25,6 +25,7 @@
 #include <iostream>
 #include <nlohmann/json.hpp>
 #include <nlohmann/json_fwd.hpp>
+#include <numbers>
 #include <tuple>
 
 struct sdl_session {
@@ -95,7 +96,7 @@ void start_frame() {
   SDL_RenderClear(main_sdl_session.renderer);
 }
 
-const Uint64 frame_delay_ns = 1000000000ULL / 1;
+constexpr Uint64 frame_delay_ns = 1000000000ULL / 1;
 void end_frame() {
   SDL_Event event;
   while (SDL_PollEvent(&event)) {
@@ -108,7 +109,7 @@ void end_frame() {
       if (event.key.key != SDLK_Q) {
         break;
       }
-
+      [[fallthrough]];
     case SDL_EVENT_QUIT:
       SDL_Quit();
       std::exit(0);
@@ -163,7 +164,6 @@ void circle(const uint16_t x_center, const uint16_t y_center,
     SDL_RenderPoint(main_sdl_session.renderer, x + x_center, -y + y_center);
     SDL_RenderPoint(main_sdl_session.renderer, y + x_center, x + y_center);
     SDL_RenderPoint(main_sdl_session.renderer, -y + x_center, x + y_center);
-    std::cout << "\n";
   }
 
   // Initialising the value of P
@@ -221,6 +221,51 @@ void line(const uint16_t x1, const uint16_t y1, const uint16_t x2,
                          0xff);
   SDL_RenderLine(main_sdl_session.renderer, x1, y1, x2, y2);
 }
+
+#ifdef CONFIG_VECTOR_FOLLOW_TRACK_RATE
+void arc(uint16_t start_x, uint16_t start_y, float start_angle_rad, float speed /*in pps*/,float angular_speed_rads, uint16_t duration, color_t color) {
+  SDL_SetRenderDrawColor(main_sdl_session.renderer, color.r, color.g, color.b,
+                         0xff);
+
+    if (speed == 0) {
+      SDL_RenderPoint(main_sdl_session.renderer, start_x, start_y);
+      return;
+    }
+
+    // Handle straight line case
+    if (std::fabs(angular_speed_rads) < 1e-6f) {
+        uint16_t steps = static_cast<int>(speed * duration);
+        for (uint16_t i = 0; i <= steps; ++i) {
+            float t = i / speed;
+            float x = start_x + std::cos(start_angle_rad) * speed * t;
+            float y = start_y + std::sin(start_angle_rad) * speed * t;
+            SDL_RenderPoint(main_sdl_session.renderer,static_cast<int>(std::round(x)), static_cast<int>(std::round(y)));
+        }
+        return;
+    }
+
+    float r = speed / angular_speed_rads;
+
+    // Center of circle: perpendicular to heading
+    float center_x = start_x - r * std::sin(start_angle_rad);
+    float center_y = start_y + r * std::cos(start_angle_rad);
+
+    // Angle from center to start point
+    float radius_angle = std::atan2(start_y - center_y, start_x - center_x);
+
+    // Step size in time — approx 1 pixel arc-length per step
+    float dt = 1.0f / std::max(std::fabs(speed), 1.0f);
+    uint16_t steps = static_cast<int>(duration / dt);
+
+    for (uint16_t i = 0; i <= steps; ++i) {
+        float t = i * dt;
+        float a = radius_angle + angular_speed_rads * t;
+        float x = center_x + std::fabs(r) * std::cos(a);
+        float y = center_y + std::fabs(r) * std::sin(a);
+        SDL_RenderPoint(main_sdl_session.renderer,static_cast<int>(std::round(x)), static_cast<int>(std::round(y)));
+    }
+}
+#endif
 } // namespace draw
 
 namespace net {

src/hal/hal_pico.cpp

@@ -54,6 +54,8 @@ void circle(const uint16_t x_center, const uint16_t y_center,const uint16_t radi
 }
 void rhombus(const uint16_t x_center, const uint16_t y_center, const uint16_t radius, const color_t color) {}
 void line(const uint16_t x1, const uint16_t y1, const uint16_t x2, const uint16_t y2, const color_t color) {}
+void arc(uint16_t start_x, uint16_t start_y, float start_angle, float speed /*in pps*/,float angular_speed, uint16_t duration, color_t color) {}
+
 } // namespace draw
 
 namespace net {

src/main.cpp

@@ -2,39 +2,38 @@
 #include "core/color.h"
 #include "core/config.hpp"
 #include "core/font.hpp"
+#include "core/geo.hpp"
+#include "core/gfx.hpp"
+#include "core/global.hpp"
 #include "core/units.hpp"
 #include "hal/draw.hpp"
 #include "hal/hal.hpp"
 #include "hal/net.hpp"
 #include "nlohmann/json_fwd.hpp"
+#include <cmath>
 #include <cstdint>
 #include <cstdlib>
-#include <cmath>
 #include <format>
 #include <iostream>
 #include <numbers>
 #include <string>
-#include "core/global.hpp"
-#include "core/geo.hpp"
-#include "core/gfx.hpp"
 
 #ifndef CONFIG_AUTOSCALE
 constexpr
 #endif
-uint16_t max_range = CONFIG_MAX_RANGE;
+    uint16_t max_range = CONFIG_MAX_RANGE;
-
 
 int main() {
   if (hal::init() != 0) {
     return 1;
   }
   const auto [screen_w, screen_h] = hal::get_screen_size();
-  #ifndef CONFIG_AUTOSCALE
+#ifndef CONFIG_AUTOSCALE
   const
-  #endif
+#endif
-  float pixels_per_km =
+      float pixels_per_km =
-      static_cast<float>(screen_h > screen_w ? screen_w : screen_h) /
+          static_cast<float>(screen_h > screen_w ? screen_w : screen_h) /
-      (max_range * 2);
+          (max_range * 2);
   bool odd_even = true;
 
   const uint16_t middle_x = (screen_w / 2);
@@ -85,94 +84,176 @@ int main() {
       }
     }
 
-    #ifdef CONFIG_AUTOSCALE
+#ifdef CONFIG_AUTOSCALE
     {
       // fardest aircraft in km
       uint16_t fardest_aircraft_distance_linear = 0;
-    #endif
+#endif
 
-    { // draw planes
+      { // draw planes
-      nlohmann::json aircraft = net::http_get_json(std::format("{}/aircraft.json", CONFIG_BASE_URL));
+        nlohmann::json aircraft = net::http_get_json(
-      if (aircraft!= nullptr) {
+            std::format("{}/aircraft.json", CONFIG_BASE_URL));
-        for(nlohmann::json &craft : aircraft["aircraft"]) {
+        if (aircraft != nullptr) {
+#ifdef CONFIG_EXTRA_INFO
+          font::puts(
+              std::format("Tracking {} aircraft", aircraft["aircraft"].size()),
+              0, 0, {0xff, 0xff, 0xff});
+#endif
+          for (nlohmann::json &craft : aircraft["aircraft"]) {
 
-          uint32_t altitude;
+            uint32_t altitude;
-          try {
+            try {
-            if(craft["alt_baro"].is_string()) {
+              if (craft["alt_baro"].is_string()) {
+                altitude = 0;
+              } else {
+                altitude = craft["alt_baro"].get<uint32_t>();
+#ifdef CONFIG_METRIC
+                altitude = feet_to_meters(altitude);
+#endif
+              }
+            } catch (...) {
+              std::clog << YELLOW "[WARNING]" RESET
+                                  " aircraft with no alt data detected!\n";
               altitude = 0;
-            } else {
-              altitude =craft["alt_baro"].get<uint32_t>();
-              #ifdef CONFIG_METRIC
-              altitude = feet_to_meters(altitude);
-              #endif
             }
-          } catch(...) {
+#ifndef CONFIG_METRIC
-            std::clog << YELLOW"[WARNING]" RESET " aircraft with no alt data detected!\n";
+            // aircraft ground speed in knots
-            altitude = 0;
+            float speed_knot;
+#endif
+            // aircraft ground speed in km/h
+            float speed;
+            // aircraft track in degreees
+            float track;
+            try {
+#ifdef CONFIG_METRIC
+              speed = knot_to_km(craft["gs"].get<float>());
+#else
+            speed_knot = craft["gs"].get<float>();
+            speed = knot_to_km(speed_knot);
+#endif
+
+              track = craft["track"].get<float>();
+            } catch (...) {
+              std::clog << YELLOW
+                  "[WARNING]" RESET
+                  " aircraft with no ground speed or track data detected!\n";
+              speed = 0;
+              track = 0;
+#ifndef CONFIG_METRIC
+              speed_knot = 0;
+#endif
+            }
+            draw::color_t color = get_altitude_color(altitude);
+            try {
+              const auto [x_offset, y_offset] = get_offset_from_station(
+                  craft["lat"].get<double>(), craft["lon"].get<double>());
+#ifdef CONFIG_AUTOSCALE
+              if (std::abs(x_offset) / 1000 >
+                  fardest_aircraft_distance_linear) {
+                fardest_aircraft_distance_linear = std::abs(x_offset) / 1000;
+              }
+              if (std::abs(y_offset) / 1000 >
+                  fardest_aircraft_distance_linear) {
+                fardest_aircraft_distance_linear = std::abs(y_offset) / 1000;
+              }
+#endif
+              const uint16_t x_center =
+                  middle_x + ((x_offset / 1000) * pixels_per_km);
+              const uint16_t y_center =
+                  middle_y + ((y_offset / 1000) * pixels_per_km);
+              // draw::pixel(x_center, y_center, color);
+
+              // speed in pixels per hour
+              const float speed_pph = speed * pixels_per_km;
+
+              // track in radians
+              const float track_rad =
+                  std::fmod((track - 90), 360.0f) *
+                  (static_cast<float>(std::numbers::pi) / 180.0f);
+#ifdef CONFIG_VECTOR_FOLLOW_TRACK_RATE
+              {
+                float track_rate_rads;
+                try {
+                  track_rate_rads =
+                      craft["track_rate"].get<float>() *
+                      (static_cast<float>(std::numbers::pi) / 180.0f);
+                } catch (...) {
+                  std::clog
+                      << YELLOW "[WARNING]" RESET
+                                " aircraft with no track_rate data detected!\n";
+                  track_rate_rads = 0;
+                }
+                draw::arc(x_center, y_center, track_rad, speed_pph / 3600,
+                          track_rate_rads, CONFIG_TIME_BASED_VECTOR_LENGHT * 60,
+                          color);
+              }
+#else
+            // lenght of Time-Based Vector
+            const float vector_lenght =
+                (speed_pph / 60) * CONFIG_TIME_BASED_VECTOR_LENGHT;
+            draw::line(
+                x_center, y_center,
+                std::clamp(x_center + (vector_lenght * std::cos(track_rad)),
+                           0.0f, static_cast<float>(UINT16_MAX)),
+                std::clamp(y_center + (vector_lenght * std::sin(track_rad)),
+                           0.0f, static_cast<float>(UINT16_MAX)),
+                color);
+#endif
+              draw::rhombus(x_center, y_center, CONFIG_AIRCRAFT_RHOMBUS_RADIUS,
+                            color);
+
+              {
+                std::string callsign;
+                try {
+                  callsign = craft["flight"].get<std::string>();
+                } catch (...) {
+                  std::clog << YELLOW "[WARNING]" RESET
+                                      " aircraft with no callsign detected!\n";
+                  callsign = CONFIG_NO_CALLSIGN_IDENTIFICATION;
+                }
+                // print some info
+                font::puts(callsign, x_center + CONFIG_X_TEXT_OFFSET,
+                           y_center - (FONT_HEIGHT + CONFIG_CHARACTER_SPACING),
+                           color);
+                font::puts(std::to_string(static_cast<uint16_t>(
+#ifdef CONFIG_METRIC
+                               speed
+#else
+                             speed_knot
+#endif
+                               )) +
+                               SPEED_UNIT,
+                           x_center + CONFIG_X_TEXT_OFFSET, y_center, color);
+                font::puts(std::to_string(altitude) + ALTITUDE_UNIT,
+                           x_center + CONFIG_X_TEXT_OFFSET,
+                           y_center + (FONT_HEIGHT + CONFIG_CHARACTER_SPACING),
+                           color);
+              }
+            } catch (...) {
+              std::clog << YELLOW "[WARNING]" RESET
+                                  " aircraft with no lat/lon data detected!\n";
+            }
           }
-
+        } else {
-          // aircraft gorund speed in km/h
+          // TODO draw visual error
-          float speed;
+          std::cerr << RED "[ERROR]" RESET " failed to get aircraft\n";
-          // aircraft track in degreees
-          float track; 
-          try {
-            speed = knot_to_km(craft["gs"].get<float>());
-            track = craft["track"].get<float>();
-          } catch(...) {
-            std::clog << YELLOW"[WARNING]" RESET " aircraft with no ground speed or track data detected!\n";
-            speed = 0;
-          }
-          draw::color_t color= get_altitude_color(altitude);
-          try {
-          const auto [x_offset,y_offset] = get_offset_from_station(craft["lat"].get<double>(), craft["lon"].get<double>());
-          #ifdef CONFIG_AUTOSCALE
-          if(std::abs(x_offset)/1000 > fardest_aircraft_distance_linear) {
-            fardest_aircraft_distance_linear = std::abs(x_offset)/1000;
-          } 
-          if(std::abs(y_offset)/1000 > fardest_aircraft_distance_linear) {
-            fardest_aircraft_distance_linear = std::abs(y_offset)/1000;
-          } 
-          #endif
-          const uint16_t x_center = middle_x+((x_offset/1000)*pixels_per_km);
-          const uint16_t y_center = middle_y+((y_offset/1000)*pixels_per_km);
-          // draw::pixel(x_center, y_center, color);
-
-          //speed in pixels per hour
-          const float speed_pph = speed* pixels_per_km;
-          // lenght of Time-Based Vector
-          const float vector_lenght  = (speed_pph/60) * CONFIG_TIME_BASED_VECTOR_LENGHT;
-
-          // track in radians
-          const float track_rad = std::fmod((track-90),365.0f) * (static_cast<float>(std::numbers::pi)/180.0f);
-
-
-          draw::line(x_center, y_center,x_center + (vector_lenght*std::cos(track_rad)), y_center + (vector_lenght*std::sin(track_rad)), color);
-          draw::rhombus(x_center, y_center, 8/*TODO: remove magic*/,color); 
-          font::puts("TEST123", x_center+10, y_center, color);
-        } catch(...) {
-          std::clog << YELLOW"[WARNING]" RESET " aircraft with no lat/lon data detected!\n";
         }
-          
+      }
+#ifdef CONFIG_AUTOSCALE
+      if (fardest_aircraft_distance_linear > 0) {
+        for (uint16_t i = CONFIG_FIRST_RING_DISTANCE; i < UINT16_MAX; i *= 2) {
+          if (i + (CONFIG_RANGE_PADDING / 2) >=
+              fardest_aircraft_distance_linear) {
+            max_range = i + CONFIG_RANGE_PADDING;
+            pixels_per_km =
+                static_cast<float>(screen_h > screen_w ? screen_w : screen_h) /
+                (max_range * 2);
+            break;
+          }
         }
-      } else {
-        // TODO draw vizual error
-        std::cerr << RED"[ERROR]" RESET " failed to get aircraft\n";
       }
     }
-        #ifdef CONFIG_AUTOSCALE
+#endif
-        if (fardest_aircraft_distance_linear > 0) {
-          for(uint16_t i = CONFIG_FIRST_RING_DISTANCE; i < UINT16_MAX; i*=2) {
-            if (i+(CONFIG_RANGE_PADDING/2) >= fardest_aircraft_distance_linear) {
-              max_range = i+CONFIG_RANGE_PADDING;
-              pixels_per_km =
-      static_cast<float>(screen_h > screen_w ? screen_w : screen_h) /
-      (max_range * 2);
-      break;
-            } 
-          }
-        }
-  }
-    #endif
 
     hal::end_frame();
   }