When c->bw is 0, the right side of the MAX functions gets turned into an unsigned integer and that results in -1 being the outcome.
This causes big issues in xwayland clients.
this fixes another issue where the cursor doesn't change when selecting text
but there is still an issue about not changing border color of clients during
dnd operations
Bug: https://github.com/djpohly/dwl/issues/318
- allow user to use a different pkg-config binary
- restore almost all (and add other ones) warning flags (-Werror is not set)
- $(XWAYLAND) is added to our CPPFLAGS
- remove useless comments
- don't generate idle-protocol.h (not used)
it is closer to the suckless philosophy (foot implements things that the suckless
guys would say that should be done by tmux or something else, but I have no
desire to create a new terminal emulator, and the best fit is foot)
also alacritty uses +100Mb of memory, more that dwl itself (~90Mb)
and foot only ~20Mb
when using wlr_output_layout_move() wlroots internally
change the state of the output to manually configured and
when updating the layout these outputs aren't ignored by
wlroots, leaving us at our own
previously we tried to get a client from the surface and then compare it with
the excluded surface, if we cannot get a client from the surface (e.g: a layer
surface) it just ignored all the next idle inhibitors no matter what
What I have should done is just checking if the excluded surface is equal to
the current idle inhibitor's surface and continue in case it is.
this will help when sending to another monitor a fullscreen client
and also will prevent a crash when a client request fullscreen when it has no monitor
On SIGCHLD, check to make sure the terminated process is not the
XWayland process before reaping it, allowing wlroots to waitpid() for it
successfully.
Fixes#177.
Join us on our [Discord server](https://discord.gg/jJxZnrGPWN)!
Join us on our [Discord server] or at [#dwl] on irc.libera.chat.
dwl is a compact, hackable compositor for Wayland based on [wlroots](https://gitlab.freedesktop.org/wlroots/wlroots/). It is intended to fill the same space in the Wayland world that dwm does in X11, primarily in terms of philosophy, and secondarily in terms of functionality. Like dwm, dwl is:
dwl is a compact, hackable compositor for [Wayland] based on [wlroots]. It is
intended to fill the same space in the Wayland world that dwm does in X11,
primarily in terms of philosophy, and secondarily in terms of functionality.
Like dwm, dwl is:
- Easy to understand, hack on, and extend with patches
- One C source file (or a very small number) configurable via `config.h`
- Limited to 2000 SLOC to promote hackability
- Limited to 2200 SLOC to promote hackability
- Tied to as few external dependencies as possible
dwl is not meant to provide every feature under the sun. Instead, like dwm, it sticks to features which are necessary, simple, and straightforward to implement given the base on which it is built. Implemented default features are:
dwl is not meant to provide every feature under the sun. Instead, like dwm, it
sticks to features which are necessary, simple, and straightforward to implement
given the base on which it is built. Implemented default features are:
- Any features provided by dwm/Xlib: simple window borders, tags, keybindings, client rules, mouse move/resize. Providing a built-in status bar is an exception to this goal, to avoid dependencies on font rendering and/or drawing libraries when an external bar could work well.
- Any features provided by dwm/Xlib: simple window borders, tags, keybindings,
client rules, mouse move/resize. Providing a built-in status bar is an
exception to this goal, to avoid dependencies on font rendering and/or
drawing libraries when an external bar could work well.
- Configurable multi-monitor layout support, including position and rotation
- Configurable HiDPI/multi-DPI support
- Idle-inhibit protocol which lets applications such as mpv disable idle monitoring
- Idle-inhibit protocol which lets applications such as mpv disable idle
monitoring
- Provide information to external status bars via stdout/stdin
- Urgency hints via xdg-activate protocol
- Support screen lockers via input-inhibitor protocol
@@ -27,37 +36,68 @@ dwl is not meant to provide every feature under the sun. Instead, like dwm, it s
Features under consideration (possibly as patches) are:
- Protocols made trivial by wlroots
- Implement the text-input and input-method protocols to support IME once ibus implements input-method v2 (see https://github.com/ibus/ibus/pull/2256 and https://github.com/djpohly/dwl/pull/12)
- Implement the text-input and input-method protocols to support IME once ibus
implements input-method v2 (see https://github.com/ibus/ibus/pull/2256 and
https://github.com/djpohly/dwl/pull/235)
Feature *non-goals* for the main codebase include:
- Client-side decoration (any more than is necessary to tell the clients not to)
- Client-initiated window management, such as move, resize, and close, which can be done through the compositor
- Client-initiated window management, such as move, resize, and close, which can
be done through the compositor
- Animations and visual effects
## Building dwl
dwl has only two dependencies: `wlroots` and `wayland-protocols`.
Simply install these (and their `-devel` versions if your distro has separate development packages) and run `make`. If you wish to build against a Git version of wlroots, check out the [wlroots-next branch](https://github.com/djpohly/dwl/tree/wlroots-next).
Simply install these (and their `-devel` versions if your distro has separate
development packages) and run `make`. If you wish to build against a Git
version of wlroots, check out the [wlroots-next branch].
To enable XWayland, you should also install xorg-xwayland and uncomment its flag in `config.mk`.
To enable XWayland, you should also install xorg-xwayland and uncomment its flag
in `config.mk`.
## Configuration
All configuration is done by editing `config.h` and recompiling, in the same manner as dwm. There is no way to separately restart the window manager in Wayland without restarting the entire display server, so any changes will take effect the next time dwl is executed.
All configuration is done by editing `config.h` and recompiling, in the same
manner as dwm. There is no way to separately restart the window manager in
Wayland without restarting the entire display server, so any changes will take
effect the next time dwl is executed.
As in the dwm community, we encourage users to share patches they have created. Check out the [patches page on our wiki](https://github.com/djpohly/dwl/wiki/Patches)!
As in the dwm community, we encourage users to share patches they have created.
Check out the [patches page on our wiki]!
## Running dwl
dwl can be run on any of the backends supported by wlroots. This means you can run it as a separate window inside either an X11 or Wayland session, as well as directly from a VT console. Depending on your distro's setup, you may need to add your user to the `video` and `input` groups before you can run dwl on a VT.
dwl can be run on any of the backends supported by wlroots. This means you can
run it as a separate window inside either an X11 or Wayland session, as well
as directly from a VT console. Depending on your distro's setup, you may need
to add your user to the `video` and `input` groups before you can run dwl on
a VT. If you are using `elogind` or `systemd-logind` you need to install
polkit; otherwise you need to add yourself in the `seat` group and
enable/start the seatd daemon.
When dwl is run with no arguments, it will launch the server and begin handling any shortcuts configured in `config.h`. There is no status bar or other decoration initially; these are instead clients that can be run within the Wayland session.
When dwl is run with no arguments, it will launch the server and begin handling
any shortcuts configured in `config.h`. There is no status bar or other
decoration initially; these are instead clients that can be run within
the Wayland session.
If you would like to run a script or command automatically at startup, you can specify the command using the `-s` option. This command will be executed as a shell command using `/bin/sh -c`. It serves a similar function to `.xinitrc`, but differs in that the display server will not shut down when this process terminates. Instead, dwl will send this process a SIGTERM at shutdown and wait for it to terminate (if it hasn't already). This makes it ideal for execing into a user service manager like [s6](https://skarnet.org/software/s6/), [anopa](https://jjacky.com/anopa/), [runit](http://smarden.org/runit/faq.html#userservices), or [`systemd --user`](https://wiki.archlinux.org/title/Systemd/User).
If you would like to run a script or command automatically at startup, you can
specify the command using the `-s` option. This command will be executed as a
shell command using `/bin/sh -c`. It serves a similar function to `.xinitrc`,
but differs in that the display server will not shut down when this process
terminates. Instead, dwl will send this process a SIGTERM at shutdown and wait
for it to terminate (if it hasn't already). This makes it ideal for execing into
a user service manager like [s6], [anopa], [runit], or [`systemd --user`].
Note: The `-s` command is run as a *child process* of dwl, which means that it does not have the ability to affect the environment of dwl or of any processes that it spawns. If you need to set environment variables that affect the entire dwl session, these must be set prior to running dwl. For example, Wayland requires a valid `XDG_RUNTIME_DIR`, which is usually set up by a session manager such as `elogind` or `systemd-logind`. If your system doesn't do this automatically, you will need to configure it prior to launching `dwl`, e.g.:
Note: The `-s` command is run as a *child process* of dwl, which means that it
does not have the ability to affect the environment of dwl or of any processes
that it spawns. If you need to set environment variables that affect the entire
dwl session, these must be set prior to running dwl. For example, Wayland
requires a valid `XDG_RUNTIME_DIR`, which is usually set up by a session manager
such as `elogind` or `systemd-logind`. If your system doesn't do this
automatically, you will need to configure it prior to launching `dwl`, e.g.:
export XDG_RUNTIME_DIR=/tmp/xdg-runtime-$(id -u)
mkdir -p $XDG_RUNTIME_DIR
@@ -65,36 +105,53 @@ Note: The `-s` command is run as a *child process* of dwl, which means that it d
### Status information
Information about selected layouts, current window title, and selected/occupied/urgent tags is written to the stdin of the `-s` command (see the `printstatus()` function for details). This information can be used to populate an external status bar with a script that parses the information. Failing to read this information will cause dwl to block, so if you do want to run a startup command that does not consume the status information, you can close standard input with the `<&-` shell redirection, for example:
Information about selected layouts, current window title, and
selected/occupied/urgent tags is written to the stdin of the `-s` command (see
the `printstatus()` function for details). This information can be used to
populate an external status bar with a script that parses the information.
Failing to read this information will cause dwl to block, so if you do want to
run a startup command that does not consume the status information, you can
close standard input with the `<&-` shell redirection, for example:
dwl -s 'foot --server <&-'
If your startup command is a shell script, you can achieve the same inside the script with the line
If your startup command is a shell script, you can achieve the same inside the
script with the line
exec <&-
Existing dwl-specific status bars and dwl-specific scripts for other status bars include:
- [somebar](https://sr.ht/~raphi/somebar/) status bar designed for dwl
- [dtaobarv2.sh](https://cdn.discordapp.com/attachments/792078050024095745/862428883423723560/dtaobarv2.sh) for use with [dtao](https://github.com/djpohly/dtao) (See "Pinned Messages" on the "customizations" channel of the [dwl Discord server](https://discord.gg/jJxZnrGPWN) for details.)
- [dwlbar.sh](https://cdn.discordapp.com/attachments/792078050024095745/810926218529472592/dwlbar.sh) for use with [waybar](https://github.com/Alexays/Waybar) (See "Pinned Messages" on the "customizations" channel of the [dwl Discord server](https://discord.gg/jJxZnrGPWN) for details.)
- [waybar-dwl](https://codeberg.org/fauxmight/waybar-dwl.git) for use with [waybar](https://github.com/Alexays/Waybar)
- [dwl-tags.sh](https://codeberg.org/novakane/yambar/src/branch/master/examples/scripts/dwl-tags.sh) for use with [yambar](https://codeberg.org/dnkl/yambar)
- [waybar-dwl.sh](https://gitee.com/guyuming76/personal/tree/dwl/gentoo/waybar-dwl) for use with [waybar](https://github.com/Alexays/Waybar) (ACCESS TO THIS SCRIPT REQUIRES gitee.com LOGIN!)
To get a list of status bars that work with dwl consult our [wiki].
## Replacements for X applications
You can find a [list of Wayland applications on the sway wiki](https://github.com/swaywm/sway/wiki/i3-Migration-Guide).
## IRC channel
dwl's IRC channel is #dwl on irc.libera.chat.
You can find a [list of useful resources on our wiki].
## Acknowledgements
dwl began by extending the TinyWL example provided (CC0) by the sway/wlroots developers. This was made possible in many cases by looking at how sway accomplished something, then trying to do the same in as suckless a way as possible.
dwl began by extending the TinyWL example provided (CC0) by the sway/wlroots
developers. This was made possible in many cases by looking at how sway
accomplished something, then trying to do the same in as suckless a way as
possible.
Many thanks to suckless.org and the dwm developers and community for the inspiration, and to the various contributors to the project, including:
Many thanks to suckless.org and the dwm developers and community for the
inspiration, and to the various contributors to the project, including:
- Alexander Courtis for the XWayland implementation
- Guido Cella for the layer-shell protocol implementation, patch maintenance, and for helping to keep the project running
- Guido Cella for the layer-shell protocol implementation, patch maintenance,
and for helping to keep the project running
- Stivvo for output management and fullscreen support, and patch maintenance
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Leonardo Hernández Hernández